Forum

Lots of 3mm thick logos  

  RSS

mikebax
(@mikebax)
Member Admin
Joined: 8 months ago
Posts: 28
28/11/2018 8:29 am  

I needed some logos to hand out to people as examples. Made these in 3mm Aluminum

Parameters:

14 Ampere cutting current, Ton=3us, Toff=27us, voltage setpoint used=6.5V

Achieved cutting speed 15mm/min, not optimized, can probably achieve 20mm/min

1543393767-logos.jpg
This topic was modified 3 months ago by mikebax

ReplyQuote
Share: