| Part | Number of parts | Subassembly | Part # | Supplier / source | Comment |
|---|---|---|---|---|---|
| THIS BOM IS UNDER CONSTRUCTION - EARLY DRAFT - Last Update 10-Apr-2020 | |||||
| Mini PC with windows 10 | 1 | Control cabinet | For example a Intel NUC or a MSI Cubi. The KMotionCNC program requires only a light PC. | ||
| Simple Wireless Keyboard + mouse set | 1 | Control cabinet | Generic wireless keyboard and mouse set e.g. the Logitech K520 | ||
| KFlop Motion controller | 1 | Control cabinet | http://dynomotion.com/KFLOP.html | ||
| Kanalog extension board for KFlop | 1 | Control cabinet | http://dynomotion.com/Kanalog.html | ||
| PC power supply | 1 | Control cabinet | Generic PC power supply from Ebay | ||
| Stepper motor driver | 2 | Control cabinet | Use the dynomotion KStep solution, or pick generic driver, for instance these: https://www.damencnc.com/nl/digital-stepper-drive-dm542-50v-4-2a-2phase/a1036?c=188 | ||
| BX17 arc generator | 1 | Arc generator | https://baxedm.com/product/bx17-arc-generator/ | ||
| BX17 installation kit | 1 | Arc generator | https://baxedm.com/product/complete-bx17-installation-kit/ | ||
| C-arc controller | C-arc | https://baxedm.com/product/carcontroller/ | |||
| Gear, Module 1.0, with 36 teeth | 3 | C-arc | GEAS1.0-36-6-B-8-KC90-TPC4-M4 | Misumi | Requires an additional machining operation; increase bore to 12mm |
| Gear, Module 1.0, with 12 teeth | 2 | C-arc | GEAB1.0-12-12-6 | Misumi | Requires an additional machining operation; cut-off two 6mm thick slices. |
| 0.255mm industial wire guide | 2 | C-arc | 3081000 0.255mm for Sodick ACCUTEX SSG EDM | Click here | |
| 608 ceramic bearing | 7 | C-arc | NA | Ebay | |
| 608 steel bearing | 1 | C-arc | NA | Ebay | |
| Toggle clamp | 2 | C-arc | MC03-1 | Misumi | |
| Miniature Clamp lever | 2 | C-arc | CLDMC4-20-B | Misumi | |
| Wire motor for wire tension | 1 | C-arc | CPM-MCVC-2310S-RLN | Teknic, Inc. | |
| Wire motor for wire speed | 1 | C-arc | CPM-MCVC-2310S-RLN | Teknic, Inc. | |
| Flushing nozzle | 2 | C-arc | Fanuc F213/2 | Ebay or BAXEDM (will be added to webshop) | |
| Shoulder bolt, M6, 8mm, 20mm shoulder length, H8 tolerance | 2 | C-arc | 07117.060.020 | Fabory | |
| Shoulder bolt, M6, 8mm, 30mm shoulder length, H8 tolerance | 1 | C-arc | 07117.060.030 | Fabory | |
| Needle bearing. OD 12mm, ID 8mm, thickness 8mm. | 6 | C-arc | HK0808-B | Misumi | 2 for each 36 teeth gear. |
| Load cell | 1 | C-arc | TAL220 | Sparkfun | https://www.sparkfun.com/products/13329 |
| Bearing | 2 | C-arc | 61801 ZZ | Misumi | For pinch mechanism excenter axle |
| Die cast enclosure | 1 | C-arc | G107MF | TME / Farnell / AVnet | https://www.tme.eu/gb/details/g107mf-ip67/multipurpose-enclosures/gainta/ Farnell / AVnet also has these: https://nl.farnell.com/multicomp/mc001078/enclosure-wall-mnt-ip65-alum-nat/dp/2545656 |
| Ballscrew | 2 | XY stage | RM1605 - 600mm long | Ebay | |
| Ballscrew nut | 2 | XY stage | came preinstalled on ballscrew spindle | Ebay | |
| Linear bearing 20mm | 8 | XY stage | SMA25GUU | Ebay | |
| Thrust bearing | 2 | XY stage | 5201ZZ-1 | https://www.damencnc.com | |
| Standard bearing | 2 | XY stage | 6000-ZZ | https://www.damencnc.com | |
| Stepper motor | 2 | XY stage | NEMA 23 1NM IP54 waterproof | https://www.damencnc.com | |
| Shaft coupler | 2 | XY stage | DCNC-D32-L32-B10.00mm | https://www.damencnc.com | |
| Shaft coupler | 2 | XY stage | DCNC-D32-L32-B6.35mm | https://www.damencnc.com | |
| Spider for shaft coupler | 2 | XY stage | SPIDER DCNC-D32-L32 (A-red) | https://www.damencnc.com | |
| Ceramic washer | Workpiece table | 94610A480 | McMaster-Carr | ||
| Spherical washer stainless steel | Workpiece table | 94007A034 | McMaster-Carr | ||
| Door Hinge | Workpiece Tank | SHHPSK6-2 | Misumi | ||
| Latch | Workpiece Tank | 5128A61 | McMaster-Carr | ||
| Machine feet | Base frame | AJPD12-70C | Misumi | ||